ROHDE & SCHWARZ SMP02 REPAIR and ROHDE & SCHWARZ SMP02 CALIBRATION
 
Custom-Cal has a high success rate in the repair of the ROHDE & SCHWARZ SMP02. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ROHDE & SCHWARZ SMP02 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Signal Generator?
Shop for Comparable Products on our  used Signal Generator page

 
   ROHDE & SCHWARZ SMP02 (1035.5005.02)   Description / Specification:   Spec Sheet 
ROHDE & SCHWARZ SMP02 20 GHz Microwave Signal Generator

The R&S SMP02 (1035.5005.02) 20 GHz Microwave Signal Generator has been designed for high output power with AM, FM and optional phase modulation. High spectral purity is ensured by the use of YIG oscillators – up to 20 GHz without any frequency multiplying. The crystal reference built-in as standard ensures an accurate and low-drift output frequency. The SMP02 has extremely low SSB phase noise of <–105 dBc/Hz at 10 GHz (10 kHz from carrier) as well as nonharmonics of <–60/54 dBc up to/above 20 GHz. Functions qualifying the SMP02 for EMC applications include the trigger facility for step-by-step sweeping, marker outputs and, above all, the extension of the frequency range to 10 MHz (option SMP-B11). Specifications. Frequency Range: 2 GHz to 20 GHz. Resolution: 0.1 Hz. Setting time (to within <1x10^–6) after IEC-/IEEE-bus delimiter: <(11 ms + 5 ms/GHz). Phase offset: adjustable in 1° steps. Harmonics f <1.8 GHz: <–30 dBc (<+8 dBm). Nonharmonics at >10 kHz from carrier f <2 GHz: <–60 dBc typ. Maximum level: >+17 dBm (10MHz to <2GHz), >+11.5 dBm (2 GHz to 20 GHz). Resolution: 0.1 dB or 0.01 dB. Output impedance: 50 ohm. Remote control: IEC625 (IEEE488). Options. SMP-B11 (1036.6240.02), Frequency Extension 0.01 GHz to 2 GHz. SMP-B12 (1036.5750.02), Pulse Modulator 2 GHz to 20 GHz. SMP-B13 (1036.7147.02), 0.01 GHz to 2 GHz. SMP-B14 (1036.7347.02), Pulse Generator. SMP-B15 (036.5250.02), RF Attenuator 27 GHz. SMP-B18 (1036.8920.02), Auxiliary Interface. SMP-B19 (1039.4303.02), Rear Connectors for RF, AF. SMP-B1 (1036.5109.02), OCXO Reference Oscillator. SM-B2 (1036.7947.02), LF Generator. SM-B5 (1036.8489.02), FM/phaseM Modulator.



 

Standard Calibration $635.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ROHDE & SCHWARZ SMP02. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Averaging
Averaging is a mathematical process to reduce the variation in a measurement by summing the data points from multiple measurements and dividing by the number of points summed.

Fall Time
Fall time is the time required for the amplitude of a pulse to decrease (fall) from a specified value (usually 90 percent of the peak value exclusive of overshoot or undershoot) to another specified value (usually 10 percent of the maximum value exclusive of overshoot or undershoot).

Noise Density
Noise Density is the amount of noise within a defined bandwidth, usually normalized to 1 Hz.

Resolution Bandwidth (RBW)
Resolution Bandwidth (RBW) is the minimum bandwidth over which you can separate two signals and still see them.

Please contact us for your ROHDE & SCHWARZ SMP02 REPAIR and/or ROHDE & SCHWARZ SMP02 20 GHz Microwave Signal Generator CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: